The rear latch is adjustable to allow for the optimum setting for easy use and a tight seal. The bagger chute is securely held in place at the front and rear to provide a tight seal between the mower deck and the chute. Next, swing the chute toward the back and lock it in place at the rear.First, slide the front mounting pin into the tube that is on the front end of the toe guard.The MulchControl front baffle can remain, with the gate open for bagging, and serves the same purpose.Ĭhute front pin inserted in tube located at end of toe guard This front baffle included with the bagger attachment is not required if the mower deck is equipped with the MulchControl™ attachment.This baffle may remain in place when the bagger chute is removed for side discharging material, however for ultimate side-discharge performance it could be removed.A baffle to narrow the side-discharge opening (where the bagger chute is installed on the mower deck) and direct the material into the chute is provided with the rear bagger and needs to be bolted underneath the deck at the front.The replacement toe guard is intended to remain on the mower deck and to be used for any mower application - bagging, side discharging, or mulching.The rear bagger attachment includes special mulching blades, a toe guard (A) with features for installing the bagger chute, and a front bagger baffle (B) to direct the material rearward into the bagger chute: Toe guard with chute-install features and front baffle installed Major components included with bagger chute A hopper-full indicator tells the operator when the bags are getting full.The top section of the chute slides into the flexible hose that is attached to the hopper and is held securely to the bottom section with an easy-to-use bungee cord.

A convenient handle is included on the top section of the chute to make installation and removal easier.The chute is a two-piece design to allow easy installation at the mower deck, without the rear of the chute being encumbered by the hopper.(107-cm) Accel Deep™ Mower Deck (42A) is provided for use of the 2-bag, 6.5-bu (229-L) Rear Bagger:

Upper chute with handle and full indicator Ballast is included for installation on the front of the vehicle to help counterbalance the weight of the hopper.Īn easy to install or remove chute is included.

John deere z355e bagger installation